GMC Truck Forum banner
1 - 20 of 42 Posts

·
GMFS =/= Real Life!
Joined
·
4,396 Posts
Discussion Starter · #1 ·
dropped pics--- bigger teasers... camera phone = fail

2dropped-1.jpg

3drooped.jpg

4dropped-1.jpg

1dropped-1.jpg



dropped about 4/8

front:
mcgaughys spindles and coils

rear:
mcgaughys shackles and flip kit

shocks: stock front, mcgaughys rear

tires: Cooper Discoverer H/T 245/70/R17
 

·
OG
Joined
·
6,939 Posts
Welcome back to earth. Looks good. I miss my static drop sometimes :(
 

·
GMFS =/= Real Life!
Joined
·
4,396 Posts
Discussion Starter · #8 ·
the coils have been on for two years, so they're settled.

and i scraped last night, so we're lifting in up a little by taking off the shackles.

AND i went to use the camera which had been in my truck for two weeks and it died.
 

·
GMFS =/= Real Life!
Joined
·
4,396 Posts
Discussion Starter · #11 ·
bigger pics soon.
 

·
GMFS =/= Real Life!
Joined
·
4,396 Posts
Discussion Starter · #13 ·
should i lift the back, or not?
 

·
Registered
Joined
·
232 Posts
how does it ride? are the shackles adjustable? I'm on a 4/6 and imma do a 2" drop on passenger side and a 1" drop on driver side to rid the lean from the gas tank.
 

·
Registered
Joined
·
506 Posts
Was it just the tranny crossmember scraping?? That's the usual problem. After I put a new crossmember on mine and raised the y-pipe I haven't found a speedbump yet I couldn't get over without scraping and I'm at about 6/8.
 

·
GMFS =/= Real Life!
Joined
·
4,396 Posts
Discussion Starter · #16 ·
Was it just the tranny crossmember scraping?? That's the usual problem. After I put a new crossmember on mine and raised the y-pipe I haven't found a speedbump yet I couldn't get over without scraping and I'm at about 6/8.
no. haha.

i hit a dip in the road and scraped the driver's side quarter.
 

·
Registered
Joined
·
9,687 Posts
timmy aint no way you scrubbed the quarter..i hope your kidding lol. if so i find that hard to believe. put ya a 5 8 on there and raise ya crossmember youll be good man.
 

·
FFR Fabrication
Joined
·
8,144 Posts

·
GMFS =/= Real Life!
Joined
·
4,396 Posts
Discussion Starter · #19 ·
timmy aint no way you scrubbed the quarter..i hope your kidding lol. if so i find that hard to believe. put ya a 5 8 on there and raise ya crossmember youll be good man.
not kidding at all. haha.

i really wish i was. it was quit a large dip.
 

·
GMFS =/= Real Life!
Joined
·
4,396 Posts
Discussion Starter · #20 ·
Yes... About 7" or so....same for the front.
so it'll be at around 3inches of lift up front, 1inch of drop in the rear? haha

peep the new thread
 
1 - 20 of 42 Posts
Top