[Down8]

http://www.gmfullsize.com/Tech Page/Useful Part Numbers.html

-bZj

 

[Cadillac boys]

So other then the fenders being grafted is there anything else I should know?

You did not give the year of the truck or escalade you want to use I did a 2003 escalade on 04 silverado fenders bolt up no grafting but I used the caddy doors and removed the cladding from the rear doors and quarters to graft on to my short bed box

 

[Cadillac boys]

04 silverado e.g. cab short bed escalade conversion

 

[guMapuk]

Hello, guys! I'm from Russia and have NBS Tahoe 2000,and bought as donor Escalade 2002.
I already swaped interior, and tomorrow start to change exterior.
At first, I gonna change front.
So, I prepared fenders, grill, bamper, hood, headlights of Escalade (paint it)
Do I need prepared front panel with radiators too? Wich is over grill?
Do the headlight's sockets are same with tahoe's?
Do the headlight's brackets same?
Do the hood's lock is same?
Brackets of bumper is same?
Thanks for anwer
There are some pics. As you see, anyway I have to repair bumper, cause boar was so big at highway)))

Отправлено с моего SM-A320F через Tapatalk

 

[Trippblack]

Welcome, always glad to see another nbs Tahoe around.

I'm sorry, it is probably the translation. What exactly are you asking?

 

[guMapuk]

What should I get for swap Escalade face to Tahoe gmt 840, except other fenders, bumper, hood and headlights?
Headlight's brackets are unical, ok, but what else?
How about headlight's wires and sockets? Is it same?

Отправлено с моего SM-A320F через Tapatalk

 

[guMapuk]

1 step

Отправлено с моего SM-A320F через Tapatalk

 

[guMapuk]

2 step

Отправлено с моего SM-A320F через Tapatalk

 

[Graystone]

So since its hard to see did you just bolt the fender on or did you graph the Tahoe fender to the new one so the body lines match

Sent from my SM-A716U using Tapatalk

 

[guMapuk]

There are lot of troubles.
First- unic brackets of headlights.
Second-light's wires...
Caddy's each light has one cable for socket and inner wiring inside. But Tahoe's has personal wire and personal socket for each type of beam.

Отправлено с моего SM-A320F через Tapatalk

 

[guMapuk]

Caddy's socket

Отправлено с моего SM-A320F через Tapatalk

 

[guMapuk]

Third- differend plastic covers of hood lock.
It's a Tahoe's cover versus caddy's grile

Look, how holes placed different

Отправлено с моего SM-A320F через Tapatalk

 

[guMapuk]

You need to get caddy's plastic cover like this

It's a caddy type, by the way, for 2002 model year

Отправлено с моего SM-A320F через Tapatalk

 

[guMapuk]

Tahoe versus Caddy

Отправлено с моего SM-A320F через Tapatalk

 

[guMapuk]

Almost done

Отправлено с моего SM-A320F через Tapatalk

 

[guMapuk]

Here the part numbers of that models

Отправлено с моего SM-A320F через Tapatalk

 

[Graystone]

I mean thats cool but you didn't answer my question

Sent from my SM-A716U using Tapatalk

 

[guMapuk]

I just use Cadillac's fenders exept tahoe's. It's bolt on! But caddy's ones have plastic extenders, and they look heterogenous with tahoe's lower level (doors and so). Anyway, later I gonna add all plastic and change back door and taillights from eski.
Later I will take more photos

Отправлено с моего SM-A320F через Tapatalk