GMC Truck Forum banner

1 - 14 of 14 Posts

·
Registered
Joined
·
362 Posts
Discussion Starter · #1 ·
Just thought i would give you guys a heads up on our latest build what we are building. Were almost finished with the project.

2000 Chevy Truck 4wd Extended Cab w/ 8" Lift on 36"s
Project includes
-6.0L Iron Block
-Stock Stroke
-4.030 Bore Diamond Pistons
-Lunati I Beam Rods
-Blower Cam
-Patriot Stage II Heads
-Arizona Longtubes
-Studed & O-ringed block
(F1 Procharger w/12 PSI of boost) 3 Core Intercooler
-------------------------------------------------------
(Fuel System)
-Areomotive 500GPH Fuel Pump & Regulator
-1/2" fuel line 8AN from the bottom of the tank to the motor (3/8" Line to each rail)
-65 lb. Precision Injectors

We have had it to together once before. The motor spun the crank pully as well as lifted the heads with the heads torqued down to 85lbs. So now we gave the bearings a little more clearance keyed the crank pully and o-ringed the block & heads using copper gaskets. Hopefully the heads stay down. It diffinetly had a ton of power though. Watching the Speedo at 40MPH we stood on it and it broke the 36" tall tires loose pitching it sideways. :D
Although it is mainely a sand dune toy I would like to get some times and dyno numbers on it before it goes.

Pics and Videos Soon

Sean
 

·
HOT AIR BALLOON OWNER
Joined
·
14,932 Posts
Ah! Sounds pretty nasty!
 

·
Jason RIP
Joined
·
6,062 Posts
Sound nice, but my question is why someone would do that on a lifted truck, it's not like it's going to be able to carve corners or anything. :think:
 

·
Registered
Joined
·
362 Posts
Discussion Starter · #4 ·
I dont think he plans on making to many turns. It is pritty much just a sand dune toy. Living an hour or two from the coast changes some of our projects around here.
 

·
Registered
Joined
·
343 Posts
Why didn't you stroke that baby out!???
 

·
Registered
Joined
·
287 Posts
I'm with everyone else, I wouldn't do that on a lifted truck thats only gonna be used on sanddunes. I mean whats the deal with it?
 

·
Registered
Joined
·
362 Posts
Discussion Starter · #8 ·
He is going to do both. I know he has several races with his buddies. But i am sure if he gets it to hook it will probabley break some stuff. He still just has a build 4L60E and a 10 bolt.
 

·
Registered
Joined
·
343 Posts
Speed Engineering said:
He still just has a build 4L60E and a 10 bolt.
:insane: :insane: :insane: :insane: :insane:
 
1 - 14 of 14 Posts
Top