[Riggs]

i was thinking about filling the holes from the front plate and lower bumper insert that had the push tabs in and having my valance re-painted, what would be the best way to patch the holes in plastic?

my valance has a couple scratches and a scuff on the side since i bought it and would like to get it fixed

 

[Graystone]

A plastic welder.

 

[RedXray]

http://www.autozone.com/autozone/accessories/Bondo-Epoxy-bumper-repair-syringe-kit/_/N-25na?itemIdentifier=572655_0_0_

 

[duke]

Red your link didn't work. I've heard of people using the plastic jb weld on plastic. They were using it on razr plastics that had holes. Seemed to work good though.

 

[Riggs]

i want to fill the holes in nice and smooth to have it painted, it isnt damaged they are just the 2 3/8" holes that used to mount the front plate

 

[Riggs]

found this

http://www.bumperplugs.com/index.php?route=product/product&path=1_11_79&product_id=79

 

[redsled04]

http://www.westsystem.com/ss/fillers


I've used this stuff on many plastic project's from filling the cup holder spot on a 96 truck dash to fixing a missing chunk from my ss number cover. It's cool stuff you can use the different fillers to make what ever you need. Started with a thick mix down to a smoother final mix. It's not fun to sand though.


Old pic but you get the idea