GMC Truck Forum banner
1 - 20 of 43 Posts

·
__the real GODFATHER__
Joined
·
1,421 Posts
Discussion Starter · #1 ·
I finally got around to finishing up the Rear static drop. I started out with a 4/6, then bagged front, then decided the ass needed to come down but didnt want bags.. So low static i went! (flip kit, blocks, shackles and notch, hope to have some shocks valved soon) Hate it or love it, whatever...

Next plans are caltrac arms and start workin on performance for the GM 350 crate under the hood... on to pics, and mind you there cell phone pics

And thanks to my boys at our shop who helped out between other work...

rawcnotch.jpg


notch.jpg


407586069_1412534878_0.jpg


drop3.jpg


drop1.jpg
 

·
__the real GODFATHER__
Joined
·
1,421 Posts
Discussion Starter · #5 ·
holy fuck! That is one of the lowest static drops I've ever seen. How many inches?
Im guessin around 10? with 6inch flip, 2in block, 2inch shackles

Looking good Nate. When you gettin the wheels back on?
Wheels back on as soon as a get money for new tires lol

i want to go back to static. fuck bags.

trucks lookin sick man
Yeah i like the bags up front so i can sit it down and look good but didnt wana mess wit it out back. I like the slight rake i get, old school FTW!
 

·
2008 RCSB
Joined
·
9,634 Posts
damn thats nice, I like that idea...but what does it look like while driving aired up?

can you post a pic at driving height from the side or 3/4?

this gives me ideas :hmm:
 

·
Smiggles
Joined
·
3,493 Posts
fucking sick dude, I guess mine will look a little higher than that? :hmm: do you bottom out at all?
 

·
Registered
Joined
·
6,654 Posts
Is it just the pictures or is the notch done kind of cheap? It looks like just a piece of square tubing welded above the frame. Could you clear that one up?
 

·
LQ9 club member
Joined
·
495 Posts
Nice, I am still wanting to see your truck in person. Looks good man.
 

·
CHIMICHANGA
Joined
·
3,275 Posts
Its a full C notch (welded through the insides of the frame) The top piece is just laid down to mimic an under the bed notch.
 

·
__the real GODFATHER__
Joined
·
1,421 Posts
Discussion Starter · #16 ·
That is pretty fuckin sick man.
Thank you sir..

fucking sick dude, I guess mine will look a little higher than that? :hmm: do you bottom out at all?
Barely actually, and hopefully nothin when i get new shocks

Is it just the pictures or is the notch done kind of cheap? It looks like just a piece of square tubing welded above the frame. Could you clear that one up?
lol as stated by my boy T.. Its full C-Noth from 2x4 square tubbing but top piece flat so all i had to trim was bed support for clean fit. its is actually very clean build but i erased pics from phone.

Looks fucking low. Good job.
Thanks, im pretty happy with it all

Nice, I am still wanting to see your truck in person. Looks good man.
At heatwave. should be in primer wit wheels back on
 

·
__the real GODFATHER__
Joined
·
1,421 Posts
Discussion Starter · #17 ·
damn thats nice, I like that idea...but what does it look like while driving aired up?

can you post a pic at driving height from the side or 3/4?

this gives me ideas :hmm:

And here the only pics i could get without a camera JB..

truck.gif

truck2.gif
 

·
AAAAHHHH
Joined
·
3,595 Posts
Hell yes. Looks sick.

I'll be tucking that much rear tire soon. Waiting on some things to arrive.

:secret:
 

·
Registered
Joined
·
957 Posts
Here's a better pic of the notches Mark.

3x2 underbed notch, with the top piece flipped on it's side to sit underneath the bed, with plating to reinforce it all.

shop186.jpg
 
1 - 20 of 43 Posts
Top