GMC Truck Forum banner
1 - 20 of 36 Posts

·
Wheel guy
Joined
·
700 Posts
Discussion Starter · #1 ·
Here we go. 22x8.5 and 22x10 Intro Matrix 6, fully polished. Tires are Pirelli Scorpion Zero Asimetrico in 265/35/22 and 295/30/22. Here are the pics:





 

·
Wheel guy
Joined
·
700 Posts
Discussion Starter · #6 ·
The tires measure 29.3 in front and 29.1 in rear. I did nothing to the rear rubs and it lays out in the rear. I have my tranny x-member sectioned and I am only about 3/4" off the ground with the frame in front. Also, I havent notched teh firewall. I am not too sure its worth it for the 3/4" of an inch.
 

·
Wheel guy
Joined
·
700 Posts
Discussion Starter · #13 ·
Ya I did smokin rice. I will wait for you to be ready, they are cleaned up and sitting in my garage.
 

·
Wheel guy
Joined
·
700 Posts
Discussion Starter · #16 ·
Thanks guys!
 

·
Registered
Joined
·
559 Posts
hey bro im guessing the backspacing for your wheels is exactly where it needs to be, but did you have to narrow the axle to get it to clear, and did u cut out the fenders in the bad at all cuz im having a problem rubbing when im layed out with my 255/35/20s, i have no idea what my backspacing is tho
 
1 - 20 of 36 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top