GMC Truck Forum banner
1 - 13 of 13 Posts

· My name's not Kevin
Joined
·
1,160 Posts
Discussion Starter · #1 ·
Spent the 1st week of my vacation cleaning, mudding and painting my garage.
We painted the floor with Rust-Oleun epoxy shield




We can't move our shit back in for a few days. But it turned out nice.
 

· My name's not Kevin
Joined
·
1,160 Posts
Discussion Starter · #10 ·
I was able to cover approx. 250 sq. ft. with 1 kit.
1st step is to sweep the floor.
next I washed it with a hose and pressure nozzle
while it was still wet. Mix the cleaner in 2 gal. of water and spread it on the floor.
Using a stiff push broom. scrub the floor. I spent about 1/2 an hour per side. Then wash it off real good.
Let dry. I let it dry over night.
Mix the 2 parts (epoxy and paint). Let it sit for an hour. Then apply. I used a paint roller on a broom stick.
If your using 2 kits. Wait an hour before mixxing the 2nd kit. It took about an hour to apply each kit. And after a couple hours it starts to "skin" over.
I painted about 4x4 foot sections at a time. That way I could add the glitter.
 
1 - 13 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top