GMC Truck Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
186 Posts
i ran my power wire through the rubber gromet in the floorboard. its right in front of the drivers seat. i ran the wire along the frame in some split loom tubing for factory look and zip tied it up from harm.
 

·
haz 12"s!
Joined
·
4,531 Posts
i ran my power wire through the rubber gromet in the floorboard. its right in front of the drivers seat. i ran the wire along the frame in some split loom tubing for factory look and zip tied it up from harm.
I used the same grommet. My 1/0 fit fine.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top