GMC Truck Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
1,186 Posts
Discussion Starter · #1 ·
Well ive had some hid's installed in my fog lights on my nnbs for 2 months or so now. I am just not noticing that my drivers side foglight is always foggy inside, or has like condensation in it. what do i need to do to fix this?
 

·
Resident Metal Head
Joined
·
5,527 Posts
usually happens cause some moisture has gotten in there and is trapped.
are you running 880 bulbs silicone in or are you running a true fog bulb?

If it's 880: I would remove the bulb, put a hair dryer to the opening for a while, to clear up any water trapped in there, then let it sit for a while to air dry. Re-install the bulb and make sure you got it completely sealed.

If it's a true 5202 bulb, I would check to see if the o-ring seal is seated properly. Do same as above to dry it, then just reinstall making sure it's a nice snug fit.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top