GMC Truck Forum banner
1 - 5 of 5 Posts

·
Registered
24x14 fuel forged 35/13.50s icon coil overs kryptonite suspension built motor full exhaust 7” lift
Joined
·
46 Posts
Discussion Starter · #1 ·
Before you comment anything negative I do have the rear lift coming in the mail it diddnt come in time before I had to go back to work.
Only have a total of 225$ invested in this 4800$ suspension
The lift paid for itself and then some because I got the front diff out the truck and doubled the 200 to 375$ then got the icon coil overs for 400$ shipped only 2 weeks old.
Lift is off a 2018 Silverado
Coil overs off a 2019 at4
Done all the work myself this weekend other then the alignment when I was done
Kryptonite ball joints and wheel bearings
Fabtech 6” gen 2 lift
Fabtech uniball UCA
Icon 2.5” coil overs with 2” spacers under them
 

Attachments

·
Registered
Joined
·
8,365 Posts
not bad on a budget. Lift looks like it could use a good cleaning and/or fresh paint. Will look proper with rear lift.
 

·
Registered
24x14 fuel forged 35/13.50s icon coil overs kryptonite suspension built motor full exhaust 7” lift
Joined
·
46 Posts
Discussion Starter · #3 ·
The color is really dark until the light hits it however has some chips on the spindles but overall I got the lift and UCA for only 200$ so not to worried about it the Tahoe has 300,000 on it it’s my Dailey and just trying to make it look good while justifying it to the wife by finding like new parts for cheap
875039

not bad on a budget. Lift looks like it could use a good cleaning and/or fresh paint. Will look proper with rear lift.
 

·
Registered
24x14 fuel forged 35/13.50s icon coil overs kryptonite suspension built motor full exhaust 7” lift
Joined
·
46 Posts
Discussion Starter · #4 ·
875040
875041
 

·
WANT LIFT!!!
2015 GMC Sierra - Crew/Std bed, 5.3, 4x4, max tow
Joined
·
3,301 Posts
Looks good so far man. Good job sourcing everything!
 
1 - 5 of 5 Posts
Top