GMC Truck Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
42 Posts
Discussion Starter #1
Does anyone know the measurements for fabricating front bag cups on a NBS with stock lower control arms? I have the bag plates from suicide doors but I will be fabricating my own cups. From what I understand there are only top cups, and the bottom plate just welds flat to the LCA. How long are the top cups?
 

·
Burning Rubber
Joined
·
994 Posts
you should call Airride and ask a technician. they 'should' tell you everything you need to know.
 

·
Jason RIP
Joined
·
6,062 Posts
Chris99GMC said:
you should call Airride and ask a technician. they 'should' tell you everything you need to know.
My guess is they won't but you could at least try, I wouldn't if I was them .. they are in the business to sell cups, not give out the dimensions so you can make your own :crazy:
 

·
Plead The First
Joined
·
2,593 Posts
When I make mine in a week or so I'm going to just mimic the dimensions of the stock spring and adjust for the dimensions on the frame. It shouldn't be too hard.
 
1 - 4 of 4 Posts
Top