GMC Truck Forum banner
1 - 3 of 3 Posts

· AAAAHHHH
Joined
·
8,309 Posts
Discussion Starter · #1 ·
Has anyone used them, like the KP ones. Ordered my rear Relocator's. And want to try to use them for the front.
 

· AAAAHHHH
Joined
·
8,309 Posts
Discussion Starter · #2 ·
Anyone?

I need something fast. All bolts broke off the LCA for the shocks. Running no shocks in the front. Has happened 2 times already since I put on new shocks before when it was lowered. And another set when I lifted it.

Rather avoid that altogether and run a new setup.
 

· AAAAHHHH
Joined
·
8,309 Posts
Discussion Starter · #4 ·
Sounds like you're not running the proper length, if they're breaking. And you can use them for any height all it does it allow you to mount the shock in a different position, you still need to set it up with the correct length/valved shock for your application.
I have ran the correct ones. Most of them being the Nitro Drop Shocks for up to 5" Drop.

The shocks that the KP Kit recomends is probally what I will use. Dont want to spend a ton of coin on shocks. Limit is under $400 for new shocks all around.

I am re-using my Monroe Air Shocks in the rear.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top