GMC Truck Forum banner
1 - 20 of 120 Posts

· Bayou Surface Drive, LLC
Joined
·
7,952 Posts
Discussion Starter · #1 · (Edited)
Got My new Truck (pics in Post 96)

***pics in post 96***

I just got me a 2006 Z-71 with 27k miles. Fully loaded. Soon will level it off and get tires after the summer, no need to wear out new mud terrains yet. It got 19 miles per gallon on the way back from Mississippi today. Now i don't have to worry about will my truck make the long haul on a vacation. Ill get pics tomm when i can get time to upload them, dial up sucks for pics imo.
5.3 liter Vortec
3.42 gears
power everything
Bose Audio system.
My plans are to put some 33x12.50r17 SSR's on it and remove one of the valence panels under the bumper when i crank the torsion bars.
The reason i jumped on this truck was i knew the previous owner personally (hes an older guy who gets a new truck once a year).
oh yeah 5 year 100k mile warranty too. It Gm used Certified.
 

· Bayou Surface Drive, LLC
Joined
·
7,952 Posts
Discussion Starter · #4 ·
Its grey stone metallic, ext cab.
I traded in the Z. It will be in laffy soon. Some guy from laffy is buying it for a dealership.
 

· Bayou Surface Drive, LLC
Joined
·
7,952 Posts
Discussion Starter · #6 ·
well not many trucks come with 3.73s anymore. getting more 3.42s all over.
 

· Bayou Surface Drive, LLC
Joined
·
7,952 Posts
Discussion Starter · #11 ·
no camo. Daniel I wanted a more reliable daily driver.
 

· Bayou Surface Drive, LLC
Joined
·
7,952 Posts
Discussion Starter · #13 ·
Probably so, But i got tired of modifying 2 trucks man it gets too expensive
 

· Bayou Surface Drive, LLC
Joined
·
7,952 Posts
Discussion Starter · #27 ·
2006 k1500/ECSB/5.3/60e/8.25/8.5/GreyStone Metallic/17" Stock Alum Wheels
Plans so far. Law and I were talking. I will crank to level (probably max out tbs) and remove the lower valence panel(these trucks have a valence on the bottopm bumper cover).
I want some Light ass tires. This will be a DD so super nasty tires arent needed. I need opinions for tires? 285/70r17 or 305/70r17s are in the future but i have 3.42's So i need an LIGHT WEIGHT tire. Buckshots are cheap may go with them the 285's are 33"
Window tint will come into effect soon. The bose radio is really clear IMO
Before i get tires I NEED to level it off i cant help it. marcus= likes cali style or level IMO
 

· Bayou Surface Drive, LLC
Joined
·
7,952 Posts
Discussion Starter · #29 ·

· Bayou Surface Drive, LLC
Joined
·
7,952 Posts
Discussion Starter · #31 ·
Ill get pics today. I hope the dial up will permit me to upload them jokers IMO
 

· Bayou Surface Drive, LLC
Joined
·
7,952 Posts
Discussion Starter · #35 ·
I like White letters BTW, but my dad has 285/70/17 on his 06 CC and i like the stance with the tbs cranked.
 

· Bayou Surface Drive, LLC
Joined
·
7,952 Posts
Discussion Starter · #38 ·
I need to get in the glove box and decode the rpo's to see what engine i have. Im not sure if its the 290 ish or 310 HP motor.
 

· Bayou Surface Drive, LLC
Joined
·
7,952 Posts
Discussion Starter · #39 ·

· Bayou Surface Drive, LLC
Joined
·
7,952 Posts
Discussion Starter · #41 ·
Alright Guys. Waht tires should be ran on here. Im not paying more than 200 a tire so thats out the question. Swampers are not needed on this rig.
1. level off the truck (remove Lower valence) probably tonight
2. Tint windows
3. Tires
 

· Bayou Surface Drive, LLC
Joined
·
7,952 Posts
Discussion Starter · #43 ·
look what i said on angry
Read it. Thats my thinking too. All Mud terrainsd are equal in cpabilities, so might as well get the cheapest one.
 

· Bayou Surface Drive, LLC
Joined
·
7,952 Posts
Discussion Starter · #46 ·
Well no pics yet. Cajun came over to the house and we boiled 2 sacks of crawfish, so pics HAD to wait IMO.
 

· Bayou Surface Drive, LLC
Joined
·
7,952 Posts
Discussion Starter · #48 ·
Well ill get pics after the bars are cranked. Im cranking them after work at 3:00 pm CST. Then tonight i can have them up. It wont look like a paw paw truck hahah (as bad).
 

· Bayou Surface Drive, LLC
Joined
·
7,952 Posts
Discussion Starter · #50 ·
Ill align it again when bars get in my possesion. 49 bucks isnt going to break me now. I need it to sit more level IMO.
 

· Bayou Surface Drive, LLC
Joined
·
7,952 Posts
Discussion Starter · #54 ·
More money if they have to do UCA knockouts
My dads truck was leveld and it was a 50 dollar crank/alignment total. you get about 2" max on stock bars IIRC
 

· Bayou Surface Drive, LLC
Joined
·
7,952 Posts
Discussion Starter · #55 ·
I need a good type of exhaust. Bullet or Spintech?
 

· Bayou Surface Drive, LLC
Joined
·
7,952 Posts
Discussion Starter · #58 ·

· Bayou Surface Drive, LLC
Joined
·
7,952 Posts
Discussion Starter · #63 ·
$50 Is about right here. most places want $70+
 
1 - 20 of 120 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top