Headers
1 - 6 of 6 Posts
Joined
·
1,946 Posts
long tubes are better. you'll gain more low end torque
Joined
·
2,645 Posts
TOG (The Other Guys) or Arizona Speed. Get them Jet-Hot coated in and out too. Screw that ceramic coated crap. Shorties arent worth the money or the time it takes to install them. Im going to speak in regards to the LS1 based motor in NBS GM trucks. JBA makes the best shorties for the 4.8 and 5.3. I dont think I have ever seen a set of shorties net over 8rwhp other than the JBA's. Long tubes will get you the HP!! Well worth the cash!!
1 - 6 of 6 Posts
Join the discussion
Recommended Reading
-
Let's make an exhaust sticky...
Engine & PerformanceOkay, here's the deal: I'm sure like most, you too are sick of the constant and chronic "what exhaust" or "what sounds best" or "(insert exhaust question here)" So, here's what I am thinking: explain exhaust theory and practicality (velocity, backpressure, flow, etc), discuss headers...- 3K
- 8M
-
Hit Man X · updated
-
Crank no start after tbi replacement
Engine & PerformanceI just finished putting the new tbi on my 91 chevy silverado 1500 5.7 v8 350 and now it won't start. It turns over like it's wanting to start. It's been sitting waiting for a new tbi for about 3 wks and finally got the new one in a few days ago. Not sure what next. Sensors are all OK, no fuel...- 0
- 45
-
StacyRae · updated
-
Cam bearing fell out when removing cam. Now what?
Engine & Performance03 1500hd. Had a lifter tap, 200xxx. Bought a BTR cam kit, new oil pump, lifter, ext, mainly for the miles not preformace. Anywho, broke it down and pulled the cam out untill the second bearing and she was stuck. Gently turned and moved in and out until I heard the dreadful clatter...- 14
- 841
-
BoltspeedMen · updated
-
tuner for a heavy chevy
Engine & Performancehey guys i got a 2000 gmc 2500 gasser 4x4 6.0 on 285's. its getting like 14mpg on the highway as it sits. Im thinking about upgrading to 35s but gas is already killing me. some friends suggested a handheld tuner would add mpg's and power??? ANY suggestions would be greatly appreciated!- 19
- 2K
-
jlsatterfield · updated
-
Gearing for 37" or 38" tires
Engine & Performancei currently have 35" tires that probably only measure to 34 inches... i have a 6" suspension lift, about an inch of crank and a 3" body lift (10 inches of lift)... when my tires wear out i am planning on either 37s or possibly 38s..NO BIGGER.. I hate ever having to worry about rubbing....I...- 34
- 29K
Join now to ask and comment!