[Rocky_907]

eh?

 

[brucebruce45]

Sam Carroll had a nnbs on Fabtech w ccm spacer Iirc on 37" kumhos an 20s. I hope u don't drop 10k on this setup either

 

[TexasPrerunner]

Cognito or FTS is what I'd do if I wanted to go that big

 

[l PATRICK l]

Just to get an idea, HighSierra had the Fabtech plus level kit AND a body lift to clear 38's IIRC, look him up for pics.

 

[Grappler4x4]

The CCM should clear them. Superlift says there 8" will clear 37s with the correct bk space. I think you'll be fine

 

[Erik Boyett]

Option 1: CCM 2.5" Lvling Kit; Ill get cali-lean with this?

Option 2) PA 1.5" BL; This work aswell?



------------

The leveling kit will bring up just the front. the bodylift will raise the entire body of the pickup evenly.

 

[brucebruce45]

Sam had spindles on amdifferent setup. The fabtech kit comes with spindles bc it isnt a full drop kitEither way I think ur gonna have to cut alot to get those 37s to fit on x11s

 

[Zero]

A 2.5" spacer will give poor angles too. IMO I would do fabtech + 1.5 or 2" spacer plus 1.5" body lift

 

[duke]

I would do a 2" spacer and a 1.5" bl personally.

 

[Blackout07]

Those tires will rub like a biatch due to your wheels, so be prepared to cut metal. You can also count on the UCA's riding the droop stops with a 2.5" level, so it will ride like crap. I would opt for a 3" body and still be ready to cut.