GMC Truck Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
9 Posts
Discussion Starter #1
Hey guys I don't know if you have ever had on of these freeze up on you but it happened to me and I can't get it out I was wondering what you guys did to get it out



I love lamp
 

·
Registered
Joined
·
346 Posts
Remove caliper bracket and bike to a shop. You'll need a torch to heat the bracket up and slowly wiggle it out. Then obviously replace the boots and lube everything up good.
 

·
The Canadian
Joined
·
3,241 Posts
Remove caliper bracket and bike to a shop. You'll need a torch to heat the bracket up and slowly wiggle it out. Then obviously replace the boots and lube everything up good.
Heat & some WD-40/PB Blaster and wiggle it free. turning it, etc.... it will work itself out eventually. Have to take the caliper bracket off the spindle first, 18mm socket.

But new pin & boot kit for caliper, like $15. some anti-sieze on the pins and slides, put it back together! By the looks of it your calipers and brackets could use some attention from some WD-40 & a wire brush and some elbow grease.
 
1 - 3 of 3 Posts
Top