GMC Truck Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
476 Posts
Discussion Starter #1
Trying to get the intake off of my 2000 GMC 5.3 - How do the fuel lines disconnect? There is also a small line at the front & center towards the top of the intake with a plastic line going to it that has some kind of clip, How does that come apart?
Is there a way to get these things apart without spending $$$ on some kind of tool that I will use once?

Thanks.

LK
 

·
Registered
Joined
·
1,045 Posts
the tool is under $10
 

·
Suburbanite
Joined
·
592 Posts
Trying to get the intake off of my 2000 GMC 5.3 - How do the fuel lines disconnect? There is also a small line at the front & center towards the top of the intake with a plastic line going to it that has some kind of clip, How does that come apart?
Is there a way to get these things apart without spending $$$ on some kind of tool that I will use once?

Thanks.

LK

Those lines are under pressure so you have to make sure there is no pressure in the lines before you remove them.
 

·
Registered
Joined
·
3,278 Posts
Release pressure by the schrader valve on the fuel rail.
 
1 - 5 of 5 Posts
Top