GMC Truck Forum banner

1 - 15 of 15 Posts

·
Dbs>Bitches.
Joined
·
3,616 Posts
Where is the how to thread? I couldn't find it! :ninja:
It's right up top.
Well shit.
Ok take it off, Clean it with some degreaser. Sand it smooth with some 80 the 120 then 220. Spray adhisive promter. i used bully dog. The use the build up primer. Few coats sand it smooth. Then base it and clear.
 

·
I don't have a truck
Joined
·
10,439 Posts
It's right up top.
Well shit.
Ok take it off, Clean it with some degreaser. Sand it smooth with some 80 the 120 then 220. Spray adhisive promter. i used bully dog. The use the build up primer. Few coats sand it smooth. Then base it and clear.
NO need for 80 grit dude. Youre gonna leave scratches in it like crazy.

Scuff with with some 600, ahdesion promoter, base coat, clear coat.

Wait 24 hours, wetsand with 1500 grit and buff with rubbing compound.
 

·
Dbs>Bitches.
Joined
·
3,616 Posts
NO need for 80 grit dude. Youre gonna leave scratches in it like crazy.

Scuff with with some 600, ahdesion promoter, base coat, clear coat.

Wait 24 hours, wetsand with 1500 grit and buff with rubbing compound.
Shit i was thinking interior
Yeah When I did my buddies I used 600 800 1000 and 200
 

·
Dbs>Bitches.
Joined
·
3,616 Posts
:shake: Yeah I was like holy shit, thats some serious sandpaper.
Thanks for pointing that out :shake:
When i did my buddies i ddi not wet sand the clear, It still turned out looking pretty good.
 

·
Dragging thru!!
Joined
·
894 Posts
just be carefull cause a new plastic one from the dealer is around 60 bucks! and aftermarket ones are harder to find due to gm and its lawsuit awhile back.
 

·
Dbs>Bitches.
Joined
·
3,616 Posts

·
Hi Im Erica
Joined
·
318 Posts
Discussion Starter · #11 ·
I saw one about painting it from the inside... does this ring a bell for anyone?? using bbq degreaser to get the gold stuff out??
 
1 - 15 of 15 Posts
Top