[Ashinpaugh]

i have a 2002 ext. cab z71 and am changing my amp that is mounted on the back of the cab. looking at the seat, on the left side where it bolts into the floor there are 2 bolts with a cover over them and 2 pins holding them onto the seat brace, how would i remove this cover without breaking it, any suggestions?

 

[Will]

pull carefully... i've done it many times, never broke one. There is also a bolt in the middle:read:

 

[ibthumpin]

you can use two screwdrivers to pry the plastic clips out - they are PITA.