[BGRAY]

How does everyone's NBS lifted app's ride? Like to see some feeback based on 9" or bigger lifts and 35's or bigger...opinions on ride quality and comfort? Bump steer?

Pipe up what kit yuur running, and what your using in the rear....Im lookin at cognito

 

[JoeR]

Ive got a cognito on my truck but its a 2wd kit so its a bit different than the 4wd kit. Its the 10-12" and im running 8" deavers with a 1" block and ive still got a bit of cali

 

[Country Boy]

I think mine rides great. I have the 7-9" Cognito set at 9" with 35s (and a 3" BL). For the rear, I have 6" HD Skyjackers and the stock 2" block. Rides great with all my tools, but can be a hair more stiff than stock with an empty bed... but its a truck, not a caddy.

 

[BGRAY]

do the 8" Deavers listed for 2500HD fit a normal 1500 CC?

 

[T-Bubba]

my buddy has a 7.5 superlift and 3inch body on 39.5 iroks... rides good... the superlift rear springs are a lil stiff not bad though

 

[TexasPrerunner]

i would deffinent'y recommend the bulletproof, cognito, and superlift 7.5 due to the fact you can set it to different ride heights and ride quality and still be a definent 6 inches higher

 

[JoeR]

do the 8" Deavers listed for 2500HD fit a normal 1500 CC?

They will fit no problems but

H49 is the 8" pack for 1500s

G15 is the 8" pack for 2500s

I have the H49 on my truck and they ride really nice, Jameson had the G15 on his 1500 and he said they rode like crap so try and get the H49s

 

[01jackedZ]

Ive got the RCX 6 inch and a 3 inch body on 35's. So basically it rides only as good as the RCX kit, but its not a bad ride. The rear is a little stiff for my liking but ive got a bad shock too. Im hoping bilsteins on all 4 corners will alleviate some of my rough ride. Im not cranked either

 

[BGRAY]

h49....is not lsited on tyhere site...is it an old part number thats been discontinued?

They will fit no problems but

H49 is the 8" pack for 1500s

G15 is the 8" pack for 2500s

I have the H49 on my truck and they ride really nice, Jameson had the G15 on his 1500 and he said they rode like crap so try and get the H49s

 

[JoeR]

h49....is not lsited on tyhere site...is it an old part number thats been discontinued?

i dont see it on there site but they arent discontinued. cognito sells them and they have them listed under the section with the nnbs 1500 lifts

 

[spanky]

I hope this isnt for the white truck :nono:

 

[JoeR]

I hope this isnt for the white truck :nono:

pretty sure its for a crew cab he posted up a while back

 

[Luke]

I thought Jameson had a problem with the 8" deavers for a 2500 hd on his truck. It pushed the wheel forward in the fender or something like that. My 7-9" Cognito on 37's rode great compared to a truck with keys cranked all the way.

 

[Megalos]

I have a 6" procomp + 3" body lift with 35" tires and my only complaint is with the add a leaves in the rear. If I did a shackle flip, zero rate, stock block combo, I'm sure it would ride amazing.

 

[SamCarroll]

I thought Jameson had a problem with the 8" deavers for a 2500 hd on his truck. It pushed the wheel forward in the fender or something like that. My 7-9" Cognito on 37's rode great compared to a truck with keys cranked all the way.

he also said it rode like a tank.

I dont have an NBS but my truck rides nice :imo

 

[JoeR]

I thought Jameson had a problem with the 8" deavers for a 2500 hd on his truck. It pushed the wheel forward in the fender or something like that. My 7-9" Cognito on 37's rode great compared to a truck with keys cranked all the way.

he also said it rode like a tank.

I dont have an NBS but my truck rides nice :imo

Jameson was running 3/4 ton springs on his 1/2 ton. He didnt have the correct deavers, they worked but the H49 like i have on my truck would have been better for him and correct for the 1/2 tons