GMC Truck Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
342 Posts
Discussion Starter #1
Small dilema aronse when i was mounting my rear hydro's. Even thouh i have a really tall notch I dont think i'll be able to lay low enough to scrape with the springs mounted above the hydro's, so i'm gonna have to do some fabricating to get the springs to sit higher, which isn't a big deal, BUT i need a measurement from someone.. preferable from the back of their frame when they are layin frame. I know it'll be tough to get a measuement when your down, so anywhere u can stick a ruler and get a number when your laid out would help me a lot so i can get a rough idea how much xtra clearance i need. :cheers: Thanks a ton fellas.
 

·
Registered
Joined
·
342 Posts
Discussion Starter #5 (Edited)
2k1slvrdo said:
we wanna see more pics lol...
Well i got the back done, just need to sandblast, paint and wait for the right springs to come in, i just put those in to move the truck. May have to fabricate a spring cup in the bridge so i can lay the back as low as it is in the second picture, but i'll worry about that later. Still workin on the front. Keep it low fellas :pimp:
 
1 - 5 of 5 Posts
Top