[sittinpurdy69]

ok so i just bought a rc bottom strut spacer. i am gonna install it sometime in the near future. also i will get the rear add a leaf. i already have the rcx 7.5 with a 3'' bl, and a 1\4'' bottom strut spacer. let me know what yall think. i know i am gonna get alot of crap bout this

 

[barkerman0]

The only problem I see is that it will make ur angles worse. With your angles being in a bind, just cause your front end to have even greater premature wear.

 

[sittinpurdy69]

thats what i was thinking, but since i never off road with my truck i am hoping it wont be as bad, just hoping... lol

 

[OHNINE]

ur not goin to stack those spacers are u?

 

[sittinpurdy69]

no right now it has the 1\4'' bottom strut spacer. i am gonna take it out and just add the rc 1'' spacer. i think the 1\4 spacer i have gives 1\2'' lift and the 1'' spacer will add 2'' of lift

 

[barkerman0]

thats what i was thinking, but since i never off road with my truck i am hoping it wont be as bad, just hoping... lol

If you are easy on it, it should last longer but thats going to make the ride quality go to crap too. If you do put the extra leveling kit on, just check everything out quite often.

 

[sittinpurdy69]

If you are easy on it, it should last longer but thats going to make the ride quality go to crap too. If you do put the extra leveling kit on, just check everything out quite often.

i baby it.. lol

 

[Blackout07]

Terrible idea. That kit can't handle a spacer at all, and with your wheels and tires it's that much worse. Bad idea all the way around.

 

[brucebruce45]

I'm not gonna tell u wha u already don't know. Ur gonna do it anyways

 

[emjr93]

Just buy a bigger lift kit. You'll end up spending more money in the long run.

 

[lesh1087]

You've got to be sitting close to 50" as it is. Seems a little excessive. Did I just say that? Well only because your gonna have the angles of nearly a 5 inch level. Eeek sounds terrible.

 

[sittinpurdy69]

i know i am kinda iffy, dont know if i want to pull the trigger, i can always take it off, aint got but like 35 dollars in it

 

[IMI4tth3w]

horrible idea. i hope your at least 2wd.

 

[KKelley]

Trying to get like 9" of lift out of a kit that only drops the diff and LCA's 5"

 

[ducksunlimited]

i know our kits are made by different companies but i tried fitting a 1" spacer in my 4" readylift kit which my angles look like yours with the 7.5 and my stuff wouldnt even go back together right you would have to force it together so you will possible have this problem to

 

[sittinpurdy69]

Thats whAt I am afraid of, just gonna try it and see

 

[OHNINE]

dont work send me the level kit..

 

[ATOM]

just gonna try it and see

:rofljest:


buy a bigger lift, sell the one you got, do it over, do it right :imo

 

[sittinpurdy69]

dont work send me the level kit..

Gotcha :head3:

 

[sittinpurdy69]

:suicide2:Lol my truck proly gonna commit suicide.....:suicide2: