GMC Truck Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
15 Posts
Discussion Starter #1
I currently have the engine removed from my truck. I cut off all the injector connectors and sodered on LS1 style connectors to work with my 60lb injectors. I am not 100% sure that I know in what order the connectors go on the drivers side. I was hopeing that someone could help me out and tell me which color wire on the injector harness go's to which cylinder. Thanks for any help you may have!
 

·
Registered
Joined
·
446 Posts
I don't really know which injectors go to each cylinder definitively. My wiring diagrams provide this.

Injector 1: Hot=Black Ground=Pink
Injector 2: Hot=Light Green/Black Stripe Ground=Pink
Injector 3: Hot=Pink/Black Stripe Ground=Pink
Injector 4: Hot=Light Blue/Black Stripe Ground=Pink
Injector 5: Hot=Black/White Stripe Ground=Pink
Injector 6: Hot=Yellow/Black Stripe Ground=Pink
Injector 7: Hot=Red/Black Stripe Ground=Pink
Injector 8: Hot=Dark Blue/White Stripe Ground=Pink

I would assume the scheme for labeling the injectors on my diagrams is by cylinder number. Like injector 1 is for cylinder 1. I really can't say for sure. Good luck.
 
1 - 3 of 3 Posts
Top