GMC Truck Forum banner

41 - 60 of 84 Posts

·
Registered
Joined
·
561 Posts
Discussion Starter #43
870171
870172
870173
Traded out the jump seat for a center console, and changed out the lower dash trim pieces but i need to paint the glove box since its peeling. Also ordered carpet this past week its shipping out of Alabama so hopefully i get it this week.
 

·
Registered
Joined
·
9,740 Posts
Change the door panels and add power locks winders will really complete it
 

·
Just some fuckin guy
Joined
·
2,424 Posts
Let me get those stock rims when your done w them. Havent had any luck finding a set locally
 

·
Registered
Joined
·
561 Posts
Discussion Starter #47 (Edited)
870317
870319
870313

870314

870315

870316

Carpet and center console installed, got the usb wired so i could enable the apple car play. I picked up a set of chrome pulls that need to get resprayed so i might look into getting the tailgate handle, and rear bumper done as well. Then begin piece a new front end to get rid of the work truck look after ill tackle wheel and tire setup.
870320
870321

I'm currently contemplating on running 265/70/16 ridge graps on the 16x10 scorpios which should look like the pic above.
 

·
Registered
Joined
·
561 Posts
Discussion Starter #49
870523
870522

I was planning on getting 265/70/16 ridge graps, but I was looking at discount tire direct the other night and I happened to look up 285/70/16 (31.8in) in the tg’s they were originally $1088 but they had some sort of deal for $734 I couldn’t pass it up. now just have to deal with my original problem of clearing the front caliper and then I’ll have them on the truck.
 

·
Registered
Joined
·
1,764 Posts
Awesome choice!
 

·
Registered
Joined
·
561 Posts
Discussion Starter #52 (Edited)
I did some test fitting today, the front wheels with spacers clear the brake calipers but i don’t have the height needed to not rub. Then I removed the spacer to see if I could run the wheels without the spacer and that’s a no go. But with that being said I’ve decided I’m just going to use the smaller caliper and rotors that came on the earlier nbs versus grinding the calipers since I would have to remove to much material to fit.
870552
870553

front with the 2in spacers
870554
870555
870556

Rear with 2in spacers
870557
870558

front no spacer
Once I get my wheel fitment taken care of the front end will be the next project, and the plans are to have it look like the truck below.
870560

Let me know what y’all think.
 

·
Registered
Joined
·
1,764 Posts
I think it’s better without the spacers.

like the front end plans, although I think the Bgray mod to eliminate the emblem would look good too.
 

·
Registered
Joined
·
561 Posts
Discussion Starter #55 (Edited)
I think it’s better without the spacers.

like the front end plans, although I think the Bgray mod to eliminate the emblem would look good too.
Thanks I agree too it’s not tall enough to pull off the look with the spacers, as far as the front end I’m torn because I do like the Bgray grille mod it really cleans it up.
 

·
Registered
Joined
·
1,764 Posts
Looks really good. Maybe needs a little more height to be perfect.
 

·
n. fil-dert.
Joined
·
7,084 Posts
Yep I was thinking a 1.5" body lift would set it off
 

·
Registered
Joined
·
561 Posts
Discussion Starter #59
Looks really good. Maybe needs a little more height to be perfect.
Yep I was thinking a 1.5" body lift would set it off
Thanks guys i completely agree with ya'll on it needing to go up another 1-2in. But for now I'm going to leave the suspension alone, I've spent a little too much money on it already and would like to get other things on the truck taken care of. But i do plan on eventually revisiting the suspension and replacing the coil and shock setup with a set of Atomic Fab coilover brackets with fox coilovers. I'm trying to have a clean GMFS style NBS since i live in an area of florida that is very prominent with clapped out squatted shit box NBS trucks.
 

·
n. fil-dert.
Joined
·
7,084 Posts
Thanks guys i completely agree with ya'll on it needing to go up another 1-2in. But for now I'm going to leave the suspension alone, I've spent a little too much money on it already and would like to get other things on the truck taken care of. But i do plan on eventually revisiting the suspension and replacing the coil and shock setup with a set of Atomic Fab coilover brackets with fox coilovers. I'm trying to have a clean GMFS style NBS since i live in an area of florida that is very prominent with clapped out squatted shit box NBS trucks.
I thought he just made brackets for 4wd. edit nvm just looked at his website.
 
41 - 60 of 84 Posts
Top