GMC Truck Forum banner

1 - 7 of 7 Posts

·
EMBRACE WHAT'S LEFT
Joined
·
3,487 Posts
cool what did you use to paint the dash and what are the specs on the sub
 

·
GMFS =/= Real Life!
Joined
·
4,392 Posts
the sub looks like a fosgate P210

Size 10"
Impedance 2-Ohm x 2
Power Handling 250 Watts RMS
500 Watts PEAK
Sensitivity 84 dB
Motor Size 62 oz. Double Stacked
Voice Coil Diameter 2.0" 4-Layer
(5.08 cm)
Speaker Connector Dual 10 AWG compression
Mounting Depth 5.75"
(14.61 cm)
Rec. Sealed Enclosure 0.59 cu. ft. (16.42 liters)
Range: 0.50 cu. ft. - 0.85 cu. ft.
Range: (14.16 liters - 24.07 liters)
Rec. Vented Enclosure 1.40 cu. ft. (39.64 liters)
Tuning Frequency (vented) 40 Hz
Port: (1) 4" diam. x 14" long
Port: (1) 10.16 cm x 35.56 cm
 

·
GM Trucks & UA
Joined
·
1,635 Posts
Looks sharp!
 

·
Registered
Joined
·
101 Posts
Discussion Starter #5
the subs are actually 12" p2s one behind each seat and i used some spray cans to do the dash
 
1 - 7 of 7 Posts
Top