GMC Truck Forum banner

1 - 20 of 73 Posts

·
Registered
Joined
·
19 Posts
Discussion Starter #1
I have a 05 NBS with a 4' RCX. Running XD Diesels with 325/60/R18.
I have way to much side poke for my liking and don't want to adds fender flares but it gets really bad on a snowmelt day and am wondering if I can get away with a less wide tire or if I should just get different rims and smaller width rubber. I will stay overall same tire size 33'' just trying to achieve less side poke in the front. I'm pondering going 295/55/R20. What are you guy running and what is the side stance ?

FullSizeRender_2_zps7jts0kya.jpg


FullSizeRender_1_zpsy3nt0eax.jpg


FullSizeRender_zps5hcxmsbf.jpg
 

·
Registered
Joined
·
19 Posts
Discussion Starter #2
Rims are 18x9 with a 0 offset. Show me what your running. Im looking for the right combination of about an 1'' of poke. I will eventually get rea spacers to bring out the tracking to match the front once I figure out which route to go.
Thanks in advance.
 

·
Registered
Joined
·
332 Posts
Why do you not want flares? Adding them and a rear spacer would give you exactly what you want.
 

·
Registered
Joined
·
876 Posts
I don't think you're going to find many guys on here that have narrow stance.
 

·
Registered
Joined
·
100 Posts
NBS 2500HD RCX 6", 20x9 0 offset with 285/55/20 Toyos






NBS 1500 Cranked Ford Keys, Stock 20's with 35" Nittos

pamscameraasof4-3-2010082.jpg


pamscameraasof4-3-2010077.jpg


pamscameraasof4-3-2010073.jpg


NBS 1500, 4" RCX, Stock 17's and 265's

DSCN1793.jpg


NBS 1500, 6" RCX, Incubus Crusher wheels with 35x12.50r20 nitto trail grapplers

IMG_1750.jpg


IMG_1751.jpg


2001 1500, 6" RCX, Gunner 6's 17x8 on 37x13.5x17 with 1.5" rear wheel spacers

DSC_0784_2.jpg


2001 1500, 6" RCX NTD, 16x8 with 4.5" backspacing and 315/75r16

kijijisales035-1.jpg


NBS 1500, RCX lift, 17x9 XD Spy wheels, 315/70/17 MTZ tires

IMAG0052.jpg


05 1500, 6"rcx, 20x12 -44mm fuel driller with 33s

58243026-D349-4BBC-B6C9-26D82619A28F-6692-0000053EF5882F8B_zpsecb6f2f2.jpg


87B99450-282E-45E4-A0C9-F7647512967C_zps76yck2ah.jpg


998984BB-096E-435F-9686-A722A05EAF0B-6692-0000053F02B06AED_zpsa533578d.jpg


05 1500, 6" RCX, 20x10 AE Hardrock Series 511, 305/55/20 Nitto Trail Grapplers

1074693_10151473187116829_743988507_o.jpg


IMAG1229_1.jpg
 

·
Registered
Joined
·
568 Posts
surprised x9's stick out that much honestly. i know the rcx pushes it out some but still. I think the front stance looks great. get some rear spacers. and if getting your truck dirty drives you crazy get some flares
 

·
Registered
Joined
·
19 Posts
Discussion Starter #13
Side poke is all good. Just want to tame it down a bit. Up here in Alberta Canada roads are always wet and dirty. Dirty truck don't bother me. Just don't like the side window spray. Anybody running 33'x11 or 11.5 on a 18x9 rim with zero offset ? Rear spacers are on the list. Thanks for the pics and replies.
 

·
Registered
Joined
·
608 Posts
you can't tell me your tires wear evenly with that set up.
Why wouldn't they I run wide setups on all my trucks and never had a problem with uneven tire wear with boggers with propern rotation and air pressure
 

·
Registered
Joined
·
876 Posts
Post up your '12...^
 
1 - 20 of 73 Posts
Top