GMC Truck Forum banner

lifted z71 with 14 bolt tech question

905 Views 12 Replies 4 Participants Last post by  bigz71
I have a 2000 z71 with 9 inches and an 85 14 bolt in the rear. I replaced my gears yesterday, and have the detroit no-spin locker in my 14 bolt. For some reason upon putting my axles back in and filling with gear oil, the locker will not engage, just clicks and the drive shaft spins. Any ideas as to what this could be? Im tryin to go out this weekend and ride, and gotta get these gears somewhat broken in right, especially since according to 4wheelparts in memphis, I got the last set in the country of the thin gears for the 4:56 and up carrier! Thanks for your help!
1 - 1 of 13 Posts
The locker keys together in a certain way - if you do not have it keyed properly it will do exactly what you are describing. When you pull it apart you will see what I am saying, the there are some teeth that are deeper than the rest (if I remember right) that need to be properly keyed.
1 - 1 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.