GMC Truck Forum banner

Lowering a Z71

915 Views 3 Replies 4 Participants Last post by  quiksilverz71
:crazy: How much would I gain if I just took out the Z71 lift blocks? Would I have to get new shocks, also? Probably have to cut down the bump stops, too. Thanks
1 - 4 of 4 Posts
stock shocks will work, you wont gain shit, you will loose 1.75" :crazy:

Why do you want to lower a Z71 though?
if you take out the blocks and crank down the torsion bars you get about a 1"/2" drop
Ya it will take it down about 2", no need to cut the bump stops. I went lower and took off the bump stop bracket and mounted the stopper to the frame. I still have the stock shocks too with no problems.
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.