GMC Truck Forum banner
1 - 2 of 2 Posts

·
ΜΟΛΩΝ ΛΑΒΕ
Joined
·
8,527 Posts
NO. There are lots of wheels out there now drilled to fit the GM-6x5.5(139.7mm) and Ford 6x135mm patterns like that. I doubt the owner had them drilled to do that, probably came that way.

You will not be able to do 5x5.5 as there is no possible way to drill a 5 lug pattern inside the 6 lug pattern without hitting existing holes even if it wasn't already dual pattern.
 

·
ΜΟΛΩΝ ΛΑΒΕ
Joined
·
8,527 Posts
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top