well thats what i am asking the amp is only 4 channel and i have 6 speakers at are all 4ohm speakers the amp can run 2ohms bridged x 2 but with 3 speakers to each side i think it will cause an ohm problem. so i was thinking of just having to run the other 2 off the deck.
marine stereo help guys
hey guys i need to replace my deck in my boat it is currently running 4 6.5s. i want to add a couple little pod speakers up on my bimini tower when i add the new radio what i am asking is can i run 4 of the speakers off a 4 channel amp and then the other 2 off the deck or should i try to run all 6 speakers off the amp. the amp is a 400watt max rating amp. and each speaker is rated at 5-50 watts rms power.
what i was thinking is running the 2 on the tower and the 2 in the front of my boat on the amp with the front pre outs from the deck and then putting a splitter at the amp for both inputs. and then running the 2 in the back of my boat on the rear of the outputs on the deck will this work?
what i was thinking is running the 2 on the tower and the 2 in the front of my boat on the amp with the front pre outs from the deck and then putting a splitter at the amp for both inputs. and then running the 2 in the back of my boat on the rear of the outputs on the deck will this work?
1 - 3 of 8 Posts
yea your right i read the specs wrong when it is bridged it goes to 4 ohms and bridges across 2 channels. so could i run 2 speakers normal on channel 1 2 speakers on channel 2 and then bridge 3 and 4 and run the 2 little 6.5s i will put on the tower on it like that.
1 - 3 of 8 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
GMC Truck Forum
A forum community dedicated to GMC and Chevy full size owners and enthusiasts. Come join the discussion about Silverados, Sierras, and other full size trucks performance, modifications, suspension, lift kits, tires, maintenance, and more!
Full Forum Listing
Explore Our Forums
Recommended Communities
