GMC Truck Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
127 Posts
Discussion Starter #1
I can't seem to find it and I remember seeing somethin about using a heat gun to heat it up and then mold it with like a baseball bat or something. Any help here guys?
 

·
Registered
Joined
·
4,056 Posts
i did a tahoe with a 4/6 drop and 295/35r22, which is a pretty big tire. I took the inners out and hammered back the metal, then put inners back in, heated it all and pushed it in with work glove as someone else ran the cold water hose over it. worked great
 

·
Registered
Joined
·
3,500 Posts
I would use an Eastwood fender roller for a smoother roll personally but the old school way works too just heat the paint with a heat gun to help prevent cracking
 
1 - 4 of 4 Posts
Top