GMC Truck Forum banner
1 - 20 of 49 Posts

·
Registered
Joined
·
220 Posts
Discussion Starter · #1 ·
Here is my turbo build. It's my 2007 Chevy Silverado. We decided to build this one my factory 5.3 was cratered due to a failed new and "improved" comp 918 valvespring. This was all fabricated by my best friend Tyler Scruggs (nitrous injected) and it really turned out awesome...The frame is very filthy in most of the pictures but it has since been cleaned :D

The log. Made of 2.5" stainless and an SDPC header flange



Downpipe routed




Coldside Routed




Motor Pics




Picked up some head studs


Installed



Had to relocate the coils


Cleaned up




 

·
Registered
Joined
·
220 Posts
Discussion Starter · #2 ·
The setup consists of
5.3 motor
02 LS6 cam ground with a 112LSA
LS6 yellow valve springs
Head studs
stock 706 heads
Ebay turbo
3"D.P. to 4" exhaust with 4" dynomax bullet
Meth Kit

I'd really like to run an 11.99 with this truck. I think I'll need bigger injectors to get there though. The stockers on this truck are 35# and it has a bigger fuel pump so it will still be a runner.

Here's a quick rev
 

·
Registered
Joined
·
1,121 Posts
sweet that engine set up looks great
 

·
HOT AIR BALLOON OWNER
Joined
·
14,932 Posts
Cool
 

·
Registered
Joined
·
220 Posts
great work. nothing beats that turbo sound
 
1 - 20 of 49 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top