GMC Truck Forum banner

1 - 18 of 18 Posts

·
Registered
Joined
·
225 Posts
Discussion Starter #1
Anyone have desktop dyno? I want to get an estimate on how much power i am making. I can give you whatever specs you need to know. Thanks!
 

·
Registered
Joined
·
225 Posts
Discussion Starter #6
Heads, valve size, cam, headers?, intake manifold, cfm rating of the carb @ X inHg, cam timing.
Heads: Stock 993 casting 1.94 intake, 1.5 ex, 75cc chambers
Cam: Delta grind #270 .224/.224 duration @ .50, .467/.467 lift
Carb: Holley 600 CFM vaccum Secondaries
Cam Timing: Straight Up 0*
 

·
Registered
Joined
·
225 Posts
Discussion Starter #10
I'm a cheap ass, it has stock exhaust manifolds back. Well its straight piped
 

·
Registered
Joined
·
225 Posts
Discussion Starter #14
give as many specs as you can,
heads, valve size, intake, headers yes or no, all cam specs, etc
Ported Vortecs, stock valve sizes, headers, 10.5:1 compression, edelbrock performer rpm airgap, holley 750, comp xe284h (cam card is downstairs, sorry) 110 lsa, cam timing 0*

anything else??
 

·
just a senior...
Joined
·
965 Posts
yes, need cam specs. Not just LSA.. I don't mind plugging all the info, but you gotta run downstairs and get me the info ;)
 

·
Registered
Joined
·
225 Posts
Discussion Starter #16
yes, need cam specs. Not just LSA.. I don't mind plugging all the info, but you gotta run downstairs and get me the info ;)
ask and you shall receive! Haha here ya go...

Valve lift: .507/.510
Duration at .006: 284/296
Valve timing @ .006: Int opens at 34* btdc, closes 69* atdc
Exh opens at 80* btdc, closes 35* btdc
Intake Centerline: 106
Duration @ .50: 240/246
Lobe lift: .338/.341
LSA: 110


i ran my combo on a trial version of some engine analyzer and got 430hp/410 tq at 5500 rpm..
 

·
I am Canadian!
Joined
·
204 Posts
My Old School Desktop Dyno is Fucked. says you have 227HP. :lol:
 

·
Registered
Joined
·
225 Posts
Discussion Starter #18
My Old School Desktop Dyno is Fucked. says you have 227HP. :lol:
Nooo good lol even my old combo made better power than that with shitty heads! haha it said i was making 358hp with 993 heads and a tiny cam
 
1 - 18 of 18 Posts
Top