GMC Truck Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
459 Posts
Discussion Starter #1
Noticing I have a upper control arm bushing on my truck that is getting bad and smashed out and deformed. Its a nbs 06 with a six inch procomp on it, but my questions are #1-This is the second nbs with the same passenger side upper bushing bad, are these problematic? And #2- Do I just put good bushings in both sides and call good or do a pair of upper arms on it? I don't really wheel it just play a little bit once in a while.
 

·
Registered
Joined
·
459 Posts
Discussion Starter #2
Nobody has any opinions or insight on this?
 

·
pootin' soot
Joined
·
3,510 Posts
That's weird how it's deforming your bushing so quick. I'd say if you go with bushings get a better brand but if you can afford go with some cognito uppers :D
 

·
Registered
Joined
·
459 Posts
Discussion Starter #5
Thank you for the replies. Will check the net out tonite to find some good bushings. Want something better than the stock for sure.
 
1 - 5 of 5 Posts
Top