GMC Truck Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
40 Posts
Discussion Starter · #1 ·
I've got a 2wd torsion bar ecsb that is cranked about 2" with a 2" block in the rear, stock it had no block. I'm going to add 3" spindles and a bigger block but my question is should I go with a 4" or 5" block? I know how the math works but I'm just curious if someone has done this and what block they used to get the fr and rr fender heights level after the spindles were added.

J
 
1 - 2 of 2 Posts
Top