GMC Truck Forum banner

1 - 20 of 20 Posts

·
Registered
Joined
·
3,382 Posts
Discussion Starter #1
Hey guys I'm looking for pics and info for relocating the shocks on my 04 Sierra. I'm using a sd.com relocation kit. I also can't figure out how to mount the lower bung because the lower control arm is boxed in. Help please. Info and pics would be awesome. Thanks in advance.
 

·
Registered
Joined
·
3,382 Posts
Discussion Starter #4
Thanks for the pic but im using stock arms, and can't figure out how to mount it on the stock arms.
 

·
Registered
Joined
·
1,617 Posts
Drill out both sides of the arm and try and run a long bolt and a sleeve similiar to the lower SD mount.
 

·
Registered
Joined
·
3,382 Posts
Discussion Starter #6
OOO so don't use the bottom mounts and make my own?

Anyone have pics of how they mounted the uppers mounts on the frame?
 

·
Registered
Joined
·
1,617 Posts
I think most people with NBS weld the lower mount to the arm.

You could also drill/hole saw out the inside of the LCA so you can try and fit the nut inside the arm.
 

·
Registered
Joined
·
3,382 Posts
Discussion Starter #8
I thought about drilling a thru hole in the lca and welding the nut of the bung onto the controll arm. Do you know a part number for a monroe shock that people use on the front of a nbs? And if i can get it at autozone or advance or some where local and not offline?
 

·
Registered
Joined
·
3,382 Posts
Discussion Starter #12
Sweet thanks for the part number.
So what do you think about drilling a thru hole and welding the nut to the lca?
 

·
Registered
Joined
·
1,617 Posts
I've never used Conti's but I'd imagine they'll be the same as the others. I have done them on Stones/Slams and they ride nice when paired with both.
 
1 - 20 of 20 Posts
Top