GMC Truck Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
Hi, My girlfriend's father has a 95 Chevy 4x4 Cheyenne and he was wanting to know a couple of things. 1 is there a Service Manuel for the front diff? 2 he says he's got some slop/play where the CV meets in the diff and was wanting to know if that was the sealed bearing in there gone bad? Any insight would be appreciative! Thanks Again!
 

·
Your HID Preferred Vendor
Joined
·
2,595 Posts
I'm sure there is a book for his front diff. None of the bearings are sealed. What kind of slop? Up and down or rotating, also, why is he concerned with it? Is it noisy, or just seem wrong? Some up and down is normal. Some rotational os normal as well
 

·
Registered
Joined
·
3 Posts
Discussion Starter · #3 ·
On one side has more play then the other side,also he is getting a (clicking sound) when applying the brake normal conditions,he has check the brakes and they are new as well,when braking hard it doesn't do it. The clicking started he's investigation and it also doesn't do it when turning. The CV's also check out to be fine.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top