GMC Truck Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
506 Posts
Discussion Starter #1
Hey guys, I know there has been quite a few people lately discussing ball joints for our trucks and after market boots. I have been talking to a guy at Energy Suspension and he sent me a couple lists he had that all go by measurement as opposed to vehicle.

What I need since I don't have one off the truck is a measurement of both holes of a stock balljoint boot and the overall height. If anyone happens to have an upper and lower balljoint off the truck or is working on the front suspension and can get these measurements it will help out a lot of people.

He did say that if I can't match up anything they have currently he is willing to get the R&D department working on something for our trucks.

Thanks for any help!:shake:
 

·
Registered
Joined
·
506 Posts
Discussion Starter #2
Bump!! If no one can get it by Monday I'll just go get a new balljoint and measure it. Can anyone confirm if the stock balljoints and the moogs use the same size boot?
 
1 - 2 of 2 Posts
Top