GMC Truck Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
50 Posts
Discussion Starter #1
i have a 90 obs k1500 with a 5 spd and need a clutch line from the master to the slave cylinder. the guy i bought the truck off of ,butchered the clutch system and i'm left to try and fix it. any help with the line would be awesome - since the chevy dealer said its discountinued and nobody around here said they can get one, let alone figure out the routing for the thing.
 

·
Bayou Surface Drive, LLC
Joined
·
7,077 Posts
Last resort you buy the fittings and lines and make one to fit your application.
 

·
GMFS Enforcer
Joined
·
3,568 Posts
The preformed clutch line is supposed to go under the Brake booster, over the top of the engine, and drop down next to the starter. If I were you, I would use a AN3 steel braided line, and go from the clutch master, down under the engine, and straight to the slave. You will need some special fittings that can be had from summit.
 
1 - 5 of 5 Posts
Top