GMC Truck Forum banner

1 - 20 of 47 Posts

·
Registered
Joined
·
78 Posts
Discussion Starter #1
ok...i'm set on a 3" body lift, but now I just need some pics to figure out what size tire i'm going to run. I just need pics of NBS trucks with a 3" bl only (ford keys are ok) and either 33s, 35s, or something of the same size. I would also like these to either be on the stock 17s or similar aftermarket 17s because i'm putting the tires on my stockers (b/c I love them).


Thanks!
(lol...ppl from fsc are going :rolleyes: here he goes w/ this question again)
 

·
Registered
Joined
·
1,137 Posts
Here is 37's with a 3" body and a crank:

Bodyand37s.gif
 

·
Paint it Black
Joined
·
142 Posts
37s? how in the hell.....

heres my tahoe, 3" with a crank on 35s

Mud1007.jpg
 

·
Registered
Joined
·
78 Posts
Discussion Starter #7
any more? I'm trying to find the right size tire so I don't get short, wide tires or the tall, pencil thin tires...
 

·
Registered
Joined
·
4,404 Posts
any more? I'm trying to find the right size tire so I don't get short, wide tires or the tall, pencil thin tires...
run 315/75/16's on stockers or 315/70/17's on stockers or on aftermarket wheels but go with x8 wheels.
 

·
Registered
Joined
·
778 Posts
might rub some inner fender plastic but i have never had trouble with rubbing anything else, i just trimmed the plastic by the wiper tank and i've had no rubbing what so ever.
 

·
Registered
Joined
·
1,137 Posts
I've always only heard and seen that its a little inner fender plastic... you wont regret it, i promise!
 

·
Bigger, Longer, and UnCut
Joined
·
987 Posts
Heres mine; 3" BL crank stock bars and 265/75R16s (bigger tires to come)
random006.jpg
 

·
Registered
Joined
·
4,404 Posts
will 315/70/17s rub anything important and uncuttable? I've heard they rub the tbars...
no they wont rub anything uncuttable. If they do rub it will be on the inside and thats plastic, trim where needed but i dont think you will have problems. And your t bars should be fine but to minimize rub up front crank the stock t bars or run ford keys cranked a little.
 

·
Registered
Joined
·
126 Posts
3" bl, 16x10's and 33x14.50 ssr's
dscn2393600x4507fw.jpg

dscn2408600x4509qs.jpg

haha i just looked at the date on those pics. ill get some updated ones this week!
 

·
Registered
Joined
·
117 Posts
ditto, I wanna do a 3 BL, and run a 285/70/16 BFG All Terrain K/O. What is this stuff about "crank" and "leveling keys". Im new to making shit taller, all my stuff has always gone lower.
 

·
Registered
Joined
·
8,114 Posts
some pics of the 04 i had.. 3" BL, ford keys and 33"s on 10" wheels

IMAGE_00276.jpg


IMAGE_00277.jpg


pics were taken by Faze when he saw my old truck rolling down the street last week
 
1 - 20 of 47 Posts
Top