GMC Truck Forum banner
1 - 20 of 28 Posts

· Registered
Joined
·
338 Posts
Discussion Starter · #1 ·
Nothing fancy for this build ,just a clean,simple,stealthy upgrade.

Here's the rundown:

Sub: Sundown SD2 8"
AMP : SAE 600D
Custom enclosure
1/2" seat lift

Front stage : EMF 6.5 coax (H/U powered for now)
Pictures to be added as equipment arrives. And as installed

Big thanks to ibanender!


 

· Registered
Joined
·
338 Posts
Discussion Starter · #6 ·
Great equipment
i like.. moar pics
That's coming out pretty sweet.
Thanks guys.
For time and simplicity sake, this enclosure is just a little .3cuft sealed box. After everything is fitted ,and dimensions are confirmed, I'll have a low tuned ported enclosure built.
I did a 1/2" seat lift to buy some excursion clearance to the floor. It's looking like I'll have enough volume to do the ported later without extra lift.
 

· Registered
Joined
·
338 Posts
Discussion Starter · #17 ·
Looks good. What did you glue all the pieces for the curve together with?
The whole front with the kerf is one piece. After the grooves were cut , wood glue and MDF dust was put in them,then the board was bent and clamped.
how does that 8' sound? good looking set up tho!
Sounds real good to me. It has more than enough clean output for me. Last setup was a ported Icon on a sundown 1000 and it was too much.


For the record, I didn't build this myself I had a guy do it to my specs. Didn't want it to come across as I built it.
 

· Baseball
Joined
·
2,577 Posts
I need this build in my life! How much to build these and send my way lol looks good man. My w7's i got from my buddy is not logical losing my back seat lol.

lol bye bye back seat.. its simple as hell man.. could probably even put both on one side unless you're going to stay ported
 
1 - 20 of 28 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top