GMC Truck Forum banner

New to the Forum Need some help on some axles

1229 Views 4 Replies 2 Participants Last post by  Big 85
Hey guys I just bought an 85 K10 with a 305. Its got a 4 inch lift and 36x14.50 super swamper tsl's. I was working on the front axle today putting new axle joints in and wheel bearings and seals. When I put the hubs back toghether and buttoned everything up. I took it for a drive and discovered my hubs were not disengaging. Im thinking I need a new hub locks?
1 - 4 of 4 Posts
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top