[08gmcSierra4x4]

can some one tell me why i cant run 35/12.50 r20 with a RC 5" on nnbs gmc? if you can run 35's with a 6" lift whay cant i do it whit a 5". the pictures of the trucks i have seen look like they got plenty of room. maybe do alittle triming. anyone know if it possible?

 

[havok88]

with the right backspacing and some trimming im sure it will fit. 33s are whats recommended though.

 

[WildChevys]

i have 35x12.5x18's on a Superlift 6" and i had some trimming to do. that 1" makes a shit ton of difference. if i had 7" i wouldn't have needed ANY trimming.

 

[08gmcSierra4x4]

33's do look good but :imo they look like the tire is small in the rear. maybe some cali lean will do the trick. and some wheel spacers in the rear to.

 

[chris15706]

You would think 35's would fit but the nnbs fenders are skinny.

 

[ChuckZ71]

I have the RC 7.5 with 35s...definitely doable on their 5" kit

 

[Zero]

with stock wheels definetely possible.

 

[chris15706]

I have the RC 7.5 with 35s...definitely doable on their 5" kit

I strongly disagree unless your driving a street queen.

This is what a 33.5 inch tire did to my fender after offroading:

And this is how close it was even after trimming turned all the way on flat ground :

This is the reason i added the 1.5 body lift. Now it rubs a little on the front of the fender. Damn these skinny nnbs fenders. :biggun:

 

[Jimbo7412]

ur 33s scrub with 5 inches of lift wow!!! i have a 2.5 leveling kit and they dont rub and im runnin a 295/70, i offroad everynow and then

 

[chris15706]

The reason being is leveling kits dont increase your track width. Slap some wheels on there with an offset that pushes it out and i gurantee you will rub.

 

[08gmcSierra4x4]

I have the RC 7.5 with 35s...definitely doable on their 5" kit

chuck that pic of your truck is the 7.5 kit with 35'S? man it looks good.

my truck will never be off road, so maybe i can make it work. although i do like the way chucks truck looks too. i may go that route.

 

[vartz04]

yep 10" wide 20's with 275/60's rub in reverse when backing up, i had to take off some metal to stop it, now I just want more lift and 305's haha.