GMC Truck Forum banner

1 - 20 of 41 Posts

·
GM
Joined
·
623 Posts
Discussion Starter #1
I have an Escalade Cluster with Plug and Play harness for any 2007-2013 NNBS truck. Plug in and go, all functions work. Asking $300 shipped and mileage programmed.

 
  • Like
Reactions: 9074life and Rdmcc7

·
Registered
Joined
·
3,884 Posts
Trim around cluster also?
 
  • Like
Reactions: 9074life

·
GM
Joined
·
623 Posts
Discussion Starter #3
No. Mileage programmed cluster and plug and play harness. Bezel you're on your own.
 

·
GM
Joined
·
623 Posts
Discussion Starter #4
Bump.

Here is the included plug and play harness.

 

·
GM
Joined
·
623 Posts
Discussion Starter #6
Mileage will be programmed prior to shipping. I have a form you will fill out with your VIN and where you want the mileage set.
 
  • Like
Reactions: 9074life

·
GM
Joined
·
623 Posts
Discussion Starter #8
I can take some tonight and post.
 

·
Registered
Joined
·
2 Posts
Do you lose voltage and oil pressure readouts with the caddy gauge or are they somehow displayed on the LCD in the lower center?
 

·
GM
Joined
·
623 Posts
Discussion Starter #11
07-08 clusters do not show it. 09-14 clusters will show it in the DIC.
 

·
GM
Joined
·
623 Posts
Discussion Starter #14
Each trim piece is about $50. It takes a bit of work to make it look right. I had about 5 hours in mine.
 

·
GM
Joined
·
623 Posts
Discussion Starter #16
Yes.
 

·
Registered
Joined
·
5 Posts
But it is just the cluster and not the bezel?

Do you have pics of it lit up? How hard to find a bezel? And will it work with 4 speed tranny vs 6?

Sent from my SM-N920V using Tapatalk
 

·
GM
Joined
·
623 Posts
Discussion Starter #18

Youre on your own for the bezel. I made my own using an escalade bezel and the stock LTZ dash bezel. Parts are around $100 for both bezels.

It will work with the 4 speed, it just wont show you what gear youre in. It will show it as being in manual mode.
 
1 - 20 of 41 Posts
Top