GMC Truck Forum banner
1 - 1 of 1 Posts

·
it's not fast enough
Joined
·
1,677 Posts
i put mine on jack stands by the frame under the rear doors. i then took the shocks off, undone the e brake cable at the frame side (on the drivers side) i then disconnected the driveshaft. i then took the passenger side leaf pack off and rolled the rear end straight with the truck *passenger side forward and the drivers side to the rear* i then dropped the drivers side leaf spring from the shackles and put the rear end over the leaf springs. i then put the passenger side leaf back on and installed my flip kits. i found it was easier with a transmission jack to hold the rearend.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top