GMC Truck Forum banner

1 - 10 of 10 Posts

·
Registered
Joined
·
455 Posts
Discussion Starter · #1 ·
I posted a while back but now cannot find the thread but my question is...

I am currently running MCG 2/4 with the flip/hanger combo in the back.. My hanger has another set of bolt holes that are lower than the ones that are currently being used. If I switch to the lower set of holes would I effectively lower my truck another 1"? I know I have asked before but I have forgotten the consenus..

Thanks for help in advance

Chris
 

·
Registered
Joined
·
605 Posts
You are in the same boat as me. I want to go another inch in back. Do you have a pic of the hanger setup?
 

·
2008 RCSB
Joined
·
9,634 Posts
If yours looks like this pic, then yes moving to the lower set of holes will lower your truck 1".

do you have the stock shackles or longer ones?

shacklesSmall.jpg
 

·
Registered
Joined
·
605 Posts
JB is the man to answer questions
 

·
Registered
Joined
·
455 Posts
Discussion Starter · #6 ·
If yours looks like this pic, then yes moving to the lower set of holes will lower your truck 1".

do you have the stock shackles or longer ones?

shacklesSmall.jpg

That looks like it, and the shackles are stock..
 

·
I don't have a truck
Joined
·
10,439 Posts
I was looking for those pics...thanks John
:shake:

Also, I might add that it you go to a 2/5 from a 2/4 you MIGHT get some vibrations, I did and had to add some shims.

Of course it'll vary with each individual truck and if its an RCSB, EC, or CC.
 
1 - 10 of 10 Posts
Top