[crewcab]

So I spent all day installing my amps and figured while I had the back seats out I would look at doing this. Measure up 2 3/4 inches from the bottom of the tab on the back of the seat and mark it. That should put you just below the top hole in the bracket. It's going to look like your cutting too much off but trust me your not. Then you have to unbolt the hinge on the seat and remove the safety cable to lay the seat back all the way down. Unfortunatley I did not do this before reinstalling the seat and it only leans forward about half way. I did not get pictures because I had to get the truck back together so I could pick up my kid. I'm going to remove the cable tomorrow and try to get pics.

 

[BLK OH7]

opcorn: waiting for pics.

Wonder if this can be done to an ext. cab :hmm:

 

[apinechevy]

holy fuck son take pics lots of them !!!

 

[[email protected]]

opcorn: waiting for pics.

Wonder if this can be done to an ext. cab :hmm:

This

 

[BLK OH7]

Were you asking a question?

Making the back seats fold down.

 

[[email protected]]

I was saying i wanted to know the same thing as you

 

[08RCSB]

I'm glad this thread got started without pics. I was really hoping to NOT see pics of this mod when I opened this thread, and I'm glad I wasn't disappointed.

 

[BLK OH7]

I was saying i wanted to know the same thing as you

Ahhh, gotcha! :thumbsup:

 

[apinechevy]

I'm glad this thread got started without pics. I was really hoping to NOT see pics of this mod when I opened this thread, and I'm glad I wasn't disappointed.

repost

 

[08RCSB]

repost

This thread just got a little better.........I made my contribution.

 

[FreddieG]

I'm glad this thread got started without pics. I was really hoping to NOT see pics of this mod when I opened this thread, and I'm glad I wasn't disappointed.

Love the new paint job!!!!:big_banana_Dance:

 

[08RCSB]

Love the new paint job!!!!:big_banana_Dance:

You'll know it's me driving around town for sure! :rofljest:

 

[crewcab]

Sorry for not getting pics. I had alot to do and little time to do it in. I will get pics up tomorrow for sure.

 

[apinechevy]

Sorry for not getting pics. I had alot to do and little time to do it in. I will get pics up tomorrow for sure.

please do so how does it work ??? do they stay up when you want them to?

 

[apinechevy]

This thread just got a little better.........I made my contribution.

repost and bone i mean repost

 

[crewcab]

You pull the seat bottom up and at the point before it goes all the way up just pull the seat back toward you and it will lay down. Then when your done just push it back toward the back wall and pull the seat bottom back up. Once you feel the tab fall back into place push the seat bottom back down and it locks back into the back wall.

 

[apinechevy]

im confused and ive taken the seats out may times for my fiberglass box ????

 

[BLK OH7]

You pull the seat bottom up and at the point before it goes all the way up just pull the seat back toward you and it will lay down. Then when your done just push it back toward the back wall and pull the seat bottom back up. Once you feel the tab fall back into place push the seat bottom back down and it locks back into the back wall.

I get it, might try this tomorrow.
2 3/4?:hmm:

 

[Cartwright]

I get it, might try this tomorrow.
2 3/4?:hmm:

It will be soo BROtastic.

 

[crewcab]

im confused and ive taken the seats out may times for my fiberglass box ????

May be I didn't understand your question?