GMC Truck Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
411 Posts
Discussion Starter #1
I have a 98 Tahoe 4wd with 2" Shackles in the back and lift blocks removed. What other options do I have to lower it another inch or 2? Leafs? It doesnt look like hangers will work because they cant be relocated much higher on the frame without hitting the floorboard.

On the front... Any spindles or control arms made?
 

·
This is a bunch of shit!
Joined
·
1,943 Posts
Not sure about the hangers hitting in the back. I know if you buy the belltech 3/4 drop you have to do a little trimming. As for the front, the only thing I have found to lower the front are different torsion keys which would let you drop the front up to 3 inches.
 

·
Registered
Joined
·
411 Posts
Discussion Starter #3
Not sure about the hangers hitting in the back. I know if you buy the belltech 3/4 drop you have to do a little trimming. As for the front, the only thing I have found to lower the front are different torsion keys which would let you drop the front up to 3 inches.

Thanks bro.. Looks like Belltech makes a kit. 3/3.5. You are right, torsion keys for the front. 2" shackle and 1.5" hanger.

Guess this will be the ticket.
 
1 - 3 of 3 Posts
Top