Joined
·
1,421 Posts
nice info thanks I just bought a obdII coder reader by Equus....
ODB2 Codes
2297
1
Pinout:
Pin 2 - J1850 Bus+
Pin 4 - Chassis Ground
Pin 5 - Signal Ground
Pin 6 - CAN High (J-2284)
Pin 7 - ISO 9141-2 K Line
Pin 10 - J1850 Bus
Pin 14 - CAN Low (J-2284)
Pin 15 - ISO 9141-2 L Line
Pin 16 - Battery Power
OBD II oxygen sensor designation
For "V" engines; BANK 1 is always on the side of the engine with the number 1 cylinder (odd cylinders), and BANK 2 is always on the side of the engine where the number 2 cylinder (even cylinders) is located.
P 0 1 0 1
1 2 3 4 5
1st digit
P = powertrain
B = Body
C = Chassis
2nd digit
0 = Standard
1 = Manufacturer specific
3rd digit
1 = Emission management
2 = Injector circuit
3 = Ignition
4 = Auxiliary emission
5 = Vehicle speed & idle control
6 = Computer & output circuit
7 = Transmission
Pin 2 - J1850 Bus+
Pin 4 - Chassis Ground
Pin 5 - Signal Ground
Pin 6 - CAN High (J-2284)
Pin 7 - ISO 9141-2 K Line
Pin 10 - J1850 Bus
Pin 14 - CAN Low (J-2284)
Pin 15 - ISO 9141-2 L Line
Pin 16 - Battery Power
OBD II oxygen sensor designation
For "V" engines; BANK 1 is always on the side of the engine with the number 1 cylinder (odd cylinders), and BANK 2 is always on the side of the engine where the number 2 cylinder (even cylinders) is located.
P 0 1 0 1
1 2 3 4 5
1st digit
P = powertrain
B = Body
C = Chassis
2nd digit
0 = Standard
1 = Manufacturer specific
3rd digit
1 = Emission management
2 = Injector circuit
3 = Ignition
4 = Auxiliary emission
5 = Vehicle speed & idle control
6 = Computer & output circuit
7 = Transmission
1 - 2 of 2 Posts
1 - 2 of 2 Posts
