GMC Truck Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
196 Posts
Discussion Starter #1
I have an error code P1416 "DTC P1416 Secondary Air Injection (AIR) System Bank 2 ". I cleared the code and it hasn't returned.

What the heck does it mean?
 

·
Registered
Joined
·
46 Posts
could be some bad gas.... you might also want to add some injector cleaner at your next refill. I am partial to chevron brand injector cleaner....
 

·
Registered
Joined
·
184 Posts
Secondary air injection failure is usually due to vacuum hoses in my experience with other vehicles. Though it may not fix your problem, i'd definitely suggest a full vacuum hose inspection before you pay someone to fix it...Lil Devil also had a good point, as sometimes your 2nd air will show faults when a cylinder or two misfires. Good luck...have you had any update on this?
 

·
Registered
Joined
·
196 Posts
Discussion Starter #4
Well, I checked all the lines and hoses, everything seemed ok at the time, then mysteriously a couple days later the light went off. ?
 

·
Registered
Joined
·
184 Posts
wo, weird...maybe you jostled a connection that was off-kilter? *shrug*.
Well, that's good news at least...here's to it staying off! :)
 
1 - 6 of 6 Posts
Top